Compress a PDF: Best Settings by Job
Quick answer
Quality 70 with 110 dpi is the default for a reason: it is readable on screen and cuts a typical scan substantially. Move one setting at a time. If the file must fit a hard limit, lower quality first and resolution second, because quality is the cheaper loss on a page of ordinary body text. If the page must be printed, raise resolution first and leave quality alone.
What this article covers
Five destinations and the settings that suit each: an email attachment, a print handout, a long-term archive, a strict upload form, and a page that will be read on a phone. It also explains which of the two settings does what, so you can reason about a case this article does not name. For the mechanism, read the beginner's guide.
What it actually does
Resolution and quality are not two names for the same knob.
Resolution is how many pixels each page is drawn with. At 110 dpi an A4 page is roughly 910 by 1287 pixels. At 150 dpi it is about 1240 by 1754. Raising resolution keeps more detail, and costs size roughly with the square of the increase — doubling the dpi quadruples the pixel count.
Quality is how hard the JPEG encoder compresses those pixels. It does not add detail; it decides how much of the detail already drawn survives. Low quality shows as blocky patches around text and banding in photographs.
Grayscale is a separate switch that throws away colour. It is a large saving on a black-and-white scan and a mistake on anything else.
The tool prints the produced size next to the download, which is the only measurement that matters. The presets below are starting points, not targets.
One more variable is easy to forget because it is not a field: the page itself. A page of dense body text tolerates less quality loss than a page of headings and white space, because the eye is reading the shapes of letters rather than recognising a photograph. The same quality setting that keeps a flyer looking sharp will turn a terms-and-conditions page into grey mush. Judge every run on the busiest page you actually have, not on the cover.
Step by step
- Decide the destination before you touch a setting. Email, print, archive and upload form want different things.
- Pick the starting point from the table below.
- Run once and read the produced size.
- If it is over the limit, lower quality by 15 points and run again.
- If it is still over, lower resolution by 30 dpi and run again.
- Stop as soon as it fits, and read the smallest type before you accept the result.
| Destination | Quality | Resolution | Grayscale |
|---|---|---|---|
| Email attachment | 70 | 110 dpi | only for a B&W scan |
| Read on a phone | 60 | 100 dpi | only for a B&W scan |
| Print handout | 85 | 200 dpi | no |
| Long-term archive | 90 | 200 dpi | no |
| Strict upload form | 50–70 | 96–110 dpi | yes if B&W |
What to check after download
- The size against the actual limit, not an estimate. Read the number the page prints.
- The smallest type at 100 per cent. This is the check that decides whether the quality setting was too aggressive.
- A photograph or logo, if the document has one. Photographs show JPEG damage before text does.
- The page count, because a refused or dropped page is silent.
- Colour, if the original carried meaning in it — a red stamp, a highlighted clause, a coloured chart.
Common beginner mistakes
Chasing a number with quality alone. On a long document, resolution is often the bigger lever per unit of readability lost, because it multiplies the pixel count of every page.
Using one preset for every job. The same document emailed to a colleague and printed for a meeting want different settings, and the tool makes that choice cheap to redo.
Turning on grayscale for a document with a colour highlight. The highlight is often the part the reader needs.
Compressing, then compressing the result again. Each pass re-encodes an already re-encoded image; the second pass loses more than the first. Always start from the original.
Saving the preset instead of the number. What matters is the size the page prints next to the download and the readability you checked yourself. A preset that produced 4.1 MB on one document can produce 9 MB on another with twice the pages.
When this tool is the right choice
When the page is a picture and the destination has a size budget. The tool is weakest when the input has a text layer, because it removes something valuable and may not save anything. It is strongest on a scan where quality 70 halves the file and the type stays readable.
Related tools
If the destination wants an image per page rather than a PDF, PDF Converter gives you the JPEGs directly, with its own resolution control — the same trade-off, one format earlier. If several documents are going to the same place, Merge PDF Files reduces the number of files first, which is often a better use of your size budget than compressing each one harder.
Use this tool
Set the destination, then start from the row in the table on Compress a PDF. Change one field per run so the produced size tells you which field mattered.
Next step
Once the settings are settled, read business use cases for the workflows where a size limit is a routine part of the job rather than a one-off.
Continue Exploring
Browse more release notes and the tools they reference.