Aquarium Substrate Calculator screenshot

Aquarium Substrate Calculator

Substrate volume in litres and mass in kilograms from the tank's footprint, the depth and the density you set.

Privacy First
0 Runs
Updated 2026-11-21
Runs in your browser
No sign-up, no upload

What the aquarium substrate calculator does

It turns a tank's footprint and a substrate depth into a volume, then a mass at the bulk density you set. Volume = length × width × depth ÷ 1000 litres; mass = volume × the bulk density. A 60 × 30 cm tank at 5 cm deep holds 9 L of substrate, and at 1.5 kg per litre that is 13.5 kg.

The density is a control because it is the product's: dry gravel is about 1.5 kg/L and dry sand about 1.6 kg/L, and a wet, coarse or porous substrate differs. The page says which figures those are and does not choose a substrate or a depth for you.

The footprint is taken from 5 to 500 cm per side, the depth from 0.5 to 30 cm and the density from 0.5 to 3 kg per litre. A depth outside its range, a zero density and a non-numeric figure are refused by name. The volume is a level bed at one depth; a sloped or mounded scape holds more, and the page does not pretend otherwise.

Figures print to up to four decimal places with trailing zeros trimmed.

How to use it

Set Tank length and Tank width to the footprint in centimetres.

Set Substrate depth to the bed you want and Bulk density to your product's figure.

Press Run. The result prints the volume in litres and the mass in kilograms and grams.

Worked example

Input with the defaults:

60 × 30 cm, 5 cm deep, 1.5 kg per litre

Output:

Volume:     9 L of substrate
Density:    1.5 kg per litre (yours)
Mass:       13.5 kg (13500 g)

Why it runs in your browser

The volume and the mass are computed in this tab. Your tank is never uploaded.

It turns the footprint of a tank and a substrate depth into a volume, then a mass at the bulk density you set. Volume = length × width × depth ÷ 1000 litres, and mass = volume × the density.

A 60 × 30 cm tank at 5 cm deep holds 9 L of substrate, and at 1.5 kg per litre that is 13.5 kg.

The density is a control because it belongs to the product: dry gravel is about 1.5 kg/L, dry sand about 1.6 kg/L, and a wet or coarse substrate differs.

Volume first, then mass

The volume follows from the footprint and the depth alone: 1000 cm³ is one litre, so 60 × 30 × 5 cm is 9 L whatever the material. The mass then needs the material's bulk density, which is why the page asks for it rather than assuming 1.5 for everything.

The footprint is taken from 5 to 500 cm per side, the depth from 0.5 to 30 cm and the density from 0.5 to 3 kg per litre. A depth outside its range and a zero density are refused by name.

A level bed, not a scape

The page computes a level bed at one depth. A sloped or mounded aquascape holds more in the deep parts, and the page does not pretend to model one; it states the assumption where the answer is read.

The density a bag states may be a dry bulk density or a packed one, and a wet substrate weighs more than the dry figure. The page prints the figure it used, so the estimate can be checked against the bag.

How to use Aquarium Substrate Calculator

Set Tank length and Tank width to the footprint in centimetres.

Set Substrate depth to the bed you want and Bulk density to your product's figure.

Press Run. The result prints the volume in litres and the mass in kilograms and grams.

What to Expect

Best for

  • Converting a footprint and a depth into litres of substrate
  • Estimating the kilograms a bag order has to cover
  • Comparing a gravel and a sand bed at the same depth

Not ideal for

  • A sloped or mounded aquascape, which holds more
  • Choosing a substrate, which is a husbandry decision
  • A wet substrate's mass, which differs from the dry density

What this tool keeps

  • The footprint, the depth and the density
  • The volume in litres and the mass in kilograms

What may need cleanup

  • A tank measured in inches, which has to become centimetres
  • A bag's density in pounds per cubic foot, which has to become kg/L

Common errors

  • Using the tank's outside dimensions rather than its inside ones
  • Assuming one density for every substrate

Example use cases

  • Ordering gravel for a 60 cm tank
  • Checking a bag's coverage against a planned depth
  • Comparing the mass of two substrate depths

Sample input

A 60 × 30 cm footprint, 5 cm deep, at 1.5 kg per litre.

Sample output

9 L of substrate and 13.5 kg of mass.

Who this is for

  • An aquarist ordering substrate for a known footprint
  • Anyone checking a bag's stated coverage

Frequently asked questions

Which density should I use?

The one your product states, or about 1.5 kg/L for dry gravel and 1.6 kg/L for dry sand. A wet substrate weighs more and a coarse or porous one less, which is why the density is a control rather than a constant.

Does the depth mean the front or the back?

It means one level depth across the whole footprint, which is what the volume formula assumes. A scape that slopes from a shallow front to a deep back holds more, and the page says it does not model that.

Why is the mass printed in grams as well as kilograms?

Because a bag is often quoted in grams or in litres while the order is planned in kilograms. The page prints both from the same volume so the two figures cannot disagree.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.