Baking Pan Size Converter
Area and volume for round, square and rectangular tins, and the factor to multiply a recipe by when you change pan.
What the baking pan size converter does
It measures two pans and tells you how to scale the recipe between them. Area depends on the shape — π × r² for a round tin, side² for a square and width × length for a rectangle — and volume is that area times the depth. The recipe factor is the target volume divided by the source volume, printed with the percentage change.
A 23 cm round tin 5 cm deep has an area of 415.4756 cm² and a volume of 2077.3781 cm³; a 20 cm round tin of the same depth has 314.1593 cm² and 1570.7963 cm³, so the factor is 0.7561, a fall of 24.3856 %. Every ingredient is multiplied by that one number, and the depths are part of it: a deeper tin takes more batter at the same footprint, which is the case a diameter-only comparison gets wrong.
A shallow tin also changes how a batter bakes — a tin's material, a batter's rise and a loose-based tin's seal are not arithmetic on its dimensions — and the page says so rather than promising an identical cake. Each dimension is taken from 5 to 100 cm and each depth from 0.5 to 30 cm; a zero depth, an unknown shape and a dimension outside the range are refused by name. The length field is read only for a rectangle, so a square tin ignores it.
Figures print to up to four decimal places with trailing zeros trimmed.
How to use it
Set Source pan shape and the tin you are converting from: its Source width or diameter, its length if it is a rectangle, and its Source depth.
Set Target pan shape and the same three figures for the tin you want to use.
Press Run. The result prints both areas, both volumes and the Recipe factor to multiply every ingredient by.
Worked example
Input with the defaults:
Round 23 cm × 5 cm deep → round 20 cm × 5 cm deep
Output:
Source area: 415.4756 cm²
Target area: 314.1593 cm²
Source volume: 2077.3781 cm³
Target volume: 1570.7963 cm³
Recipe factor: 0.7561 (-24.3856 %)
Why it runs in your browser
The areas and the ratio are computed in this tab. Your tins are never uploaded.
It measures two pans and tells you how to scale the recipe between them. Area depends on the shape — π × r² for a round tin, side² for a square, width × length for a rectangle — and volume is that area times the depth.
A 23 cm round tin at 5 cm deep holds 2077.3781 cm³; a 20 cm tin of the same depth holds 1570.7963 cm³, so the recipe factor is 0.7561 and every ingredient falls by 24.3856 %.
The depths are part of the volume, which is the case a diameter-only comparison gets wrong: a deeper tin takes more batter at the same footprint.
Area depends on the shape
A round tin's area is π × r², where r is half the diameter you type; a square tin is side², and a rectangle is width × length. The length field is read only for a rectangle, so the same form takes a square tin without a second set of controls.
The page prints each area beside the shape and dimensions it used, so a 23 cm round tin at 415.4756 cm² can be compared with a 20 cm square at 400 cm² without converting anything by hand.
Depth is part of the volume
Two tins with the same footprint and different depths take different amounts of batter, so the recipe factor is the volume ratio rather than the area ratio. At equal depths the two are the same number, which is why the depth is easy to forget.
A shallow tin also changes how a batter bakes, and a tin's material and a loose base's seal are not arithmetic on its dimensions. The page scales the quantity and says plainly that it does not promise an identical result.
How to use Baking Pan Size Converter
Set Source pan shape and the tin you are converting from: its Source width or diameter, its length if it is a rectangle, and its Source depth.
Set Target pan shape and the same three figures for the tin you want to use.
Press Run. The result prints both areas, both volumes and the Recipe factor to multiply every ingredient by.
What to Expect
Best for
- Scaling a cake recipe from one tin size to another
- Comparing a round and a square tin at the same depth
- Checking that a deeper tin of the same footprint takes more batter
Not ideal for
- Predicting a baking time, which depends on the batter and the oven
- A tin's material or a loose base's seal
- A shaped tin whose area is not a circle, square or rectangle
What this tool keeps
- Both shapes, both sets of dimensions and both depths
- The areas, the volumes and the one factor
What may need cleanup
- A tin measured in inches, which has to become centimetres
- A bundt or novelty tin, whose area this page cannot compute
Common errors
- Comparing diameters instead of areas
- Entering the tin's outside dimensions rather than its inside ones
Example use cases
- Converting an 8-inch recipe to a 9-inch tin
- Scaling a layer cake to a square tin
- Checking a factor before mixing
Sample input
A round 23 cm tin 5 cm deep converted to a round 20 cm tin 5 cm deep.
Sample output
415.4756 cm² and 2077.3781 cm³ against 314.1593 cm² and 1570.7963 cm³, a recipe factor of 0.7561.
Who this is for
- A home baker changing tin size
- Anyone checking a converted cake recipe
Frequently asked questions
Does a deeper tin really change the amount of batter?
Yes: volume is area times depth, so a tin with the same footprint and twice the depth holds twice as much. At equal depths the recipe factor equals the area ratio, which is the case most conversions assume.
Why is the rectangle length field always shown?
Because one form serves all three shapes and the page reads the length only for a rectangle. A round or square tin ignores it, so switching shape does not lose the figures you already typed.
Can I use the factor for the baking time as well?
No. A smaller, deeper batter bakes for longer at the same temperature, and the page does not model heat transfer. It scales the quantity and leaves the time to the recipe and the oven.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.