Clicks Per Second Test
Measure clicks per second over a 5, 10 or 20 second window, with the mean and fastest gap between clicks reported beside the rate.
Clicks Per Second Test
Measure clicks per second over a 5, 10 or 20 second window, with the mean and fastest gap between clicks reported beside the rate.
What the page does
The window opens on the first press and closes after the duration you chose. Only presses inside an open window count; the rate is the count divided by the measured window, not by the nominal one.
The gaps are the differences between consecutive press timestamps. Their mean describes the rhythm you held, and their minimum is the fastest single interval the browser delivered.
The page runs entirely in this browser tab; nothing is uploaded.
Pick a window of five, ten or twenty seconds and press the pad. Every press inside the window is timestamped, and when the window closes the page reports clicks per second, the total count, and the mean and fastest gap between presses.
The measured window is used in the division rather than the chosen duration, so a late first frame cannot inflate the rate. A click test measures your hand and your mouse as the browser reports them, nothing more.
How to use Clicks Per Second Test
Choose a duration, then press the pad once. That press starts the window; the label changes to "Click!" and the countdown begins.
Keep pressing until the time-left line reaches zero. The panel then shows the final rate, and the pad returns to its start state so a second window can be run.
Why the rate uses the measured window
The clock does not stop at exactly five thousand milliseconds: the closing frame lands a little after the deadline, and a press can arrive between the deadline and that frame. Dividing the count by the nominal duration would credit clicks that happened after the window, and dividing by nothing would be worse.
So the window is the difference between the two timestamps the page actually read. The count is the presses with a timestamp inside that interval. The two numbers in the panel therefore describe the same interval, which is the only way the rate can be checked against its own count.
What to Expect
Best for
- A repeatable short clicking benchmark
- Comparing mice or grip styles
- Measuring burst speed honestly
Not ideal for
- A long endurance test, which needs a different window
- Judging a keyboard or a touchscreen
- Comparing against other people, whose devices differ
What this tool keeps
- Every press timestamp inside the window
What may need cleanup
- Nothing: each run is self-contained
Common errors
- Presses before the pad starts the window are not counted
- A press landing after the closing frame belongs to the next run
Example use cases
- Run a five-second sprint
- Run a twenty-second sustained test
- Compare the mean gap with the fastest gap
Sample input
A five-second window with 32 presses, closed at 5.004 seconds
Sample output
32 clicks in 5.004 s = 6.39 clicks per second, mean gap 156 ms
Who this is for
- Readers comparing input devices
- Anyone curious about clicking speed
Frequently asked questions
When exactly does the window start?
On the press that starts it, not on the button press that chose a duration. The label changes to "Click!" at that moment, and the countdown is driven by requestAnimationFrame.
Why does my rate differ from another site?
Different windows, different counting rules and different clocks. This page counts only presses inside the measured window and divides by that window; a page that divides by the nominal duration will read slightly higher.
Can I use a touchscreen?
Yes. A tap is a click event, so it counts. The page cannot tell a finger from a mouse, and the result describes the device you actually used.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.