Cubic Feet per Minute to m³/h screenshot

Cubic Feet per Minute to m³/h

Cubic Feet per Minute to m³/h: convert cfm to m³/h with the exact factor shown on the page, in your browser.

Privacy First
0 Runs
Updated 2026-11-22
No upload
Instant
No signup

What this Cubic Feet per Minute to m³/h page does

The page converts cubic feet per minute (cfm) to cubic metres per hour (m³/h) with one exact factor: one cubic foot per minute is 1.69901079552 cubic metres per hour. It applies m³/h = cfm × 1.69901079552 through the L/s base unit and prints the answer to 4 decimal places with trailing zeros trimmed.

How to use it

Type the value in the box, set From unit to cfm and To unit to m³/h, then press Run. Both menus offer the whole flow rate family (m³/s, L/min, L/s, m³/h, cfs, cfm, gpm, gpm-imp, bbl/day), so the reverse direction is one selection away.

Worked example

Input: 100 cfm

Output: 169.9011 m³/h

Why it runs in your browser

The conversion is one multiplication and one division in this page's own JavaScript. Nothing is uploaded, nothing is stored, and the page works offline after it loads. A unit from another dimension, or a value that is not a number, is refused with the reason named rather than guessed at.

Cubic Feet per Minute to m³/h converts cubic feet per minute (cfm) to cubic metres per hour (m³/h) with an exact factor: one cubic foot per minute is 1.69901079552 cubic metres per hour. The rule on this page is m³/h = cfm × 1.69901079552.

The engine reads the value as one number, converts it through the flow rate base unit (L/s), and prints the answer to 4 decimal places with trailing zeros trimmed. A unit from another dimension is refused with both dimensions named.

Worked example: 100 cfm gives 169.9011 m³/h.

How to use the Cubic Feet per Minute to m³/h page

Type the value in the box, set From unit to cfm and To unit to m³/h, then press Run. The answer appears below the form.

Both menus offer the whole flow rate family (m³/s, L/min, L/s, m³/h, cfs, cfm, gpm, gpm-imp, bbl/day), so the page also answers the reverse direction without a second page.

  • Value — one number, for example 100
  • From unit — cfm (cubic feet per minute)
  • To unit — m³/h (cubic metres per hour)

The factor this page applies

m³/h = cfm × 1.69901079552. One cubic foot per minute is 1.69901079552 cubic metres per hour.

The factor is a definition, not a measurement: the page multiplies by it and divides by the target factor, so the same input always prints the same answer. The result is rounded to 4 decimal places and trailing zeros are trimmed.

  • Base unit — L/s
  • From factor — 0.47194744320000004 L/s per cfm
  • To factor — 0.2777777777777778 L/s per m³/h

What to Expect

Best for

  • Converting one value when both units are already known
  • Checking a cfm to m³/h figure by hand
  • Reading a specification written in the other unit system

Not ideal for

  • Converting a mixed list of units in one pass
  • Anything that needs a certified or statutory table rather than a definition

What this tool keeps

  • Your input in this tab
  • The exact factor, printed on the page
  • The same answer on every run

What may need cleanup

  • A long decimal, rounded to 4 decimal places
  • The unit label, which names the unit rather than converting it

Common errors

  • A blank value is refused rather than read as zero
  • A unit from another dimension is refused, never coerced
  • Typing the unit symbol in the value box instead of the number

Example use cases

  • A quick conversion while reading a spec sheet
  • A second opinion on a cfm to m³/h figure

Sample input

100 cfm

Sample output

169.9011 m³/h

Who this is for

  • Students checking a conversion
  • Anyone reading a specification that uses the other unit

Frequently asked questions

What factor does this page use?

One cubic foot per minute is 1.69901079552 cubic metres per hour. The page applies m³/h = cfm × 1.69901079552 and prints 4 decimal places.

Which units can I choose?

The From and To menus offer the whole flow rate family: m³/s, L/min, L/s, m³/h, cfs, cfm, gpm, gpm-imp, bbl/day. The page opens on cfm and m³/h.

What happens if I type something that is not a number?

The page refuses it by name instead of reading it as zero. A unit from another dimension is refused the same way, with both dimensions named.

Is the value sent anywhere?

No. The conversion runs in this tab with JavaScript; nothing is uploaded, nothing is stored and the page works offline after it loads.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.