m³/h to Litres per Second
m³/h to Litres per Second: convert m³/h to L/s with the exact factor shown on the page, in your browser.
What this m³/h to Litres per Second page does
The page converts cubic metres per hour (m³/h) to litres per second (L/s) with one exact factor: one litre per second is 3.6 cubic metres per hour. It applies L/s = m³/h ÷ 3.6 through the L/s base unit and prints the answer to 6 decimal places with trailing zeros trimmed.
How to use it
Type the value in the box, set From unit to m³/h and To unit to L/s, then press Run. Both menus offer the whole flow rate family (m³/s, L/min, L/s, m³/h, cfs, cfm, gpm, gpm-imp, bbl/day), so the reverse direction is one selection away.
Worked example
Input: 18 m³/h
Output: 5 L/s
Why it runs in your browser
The conversion is one multiplication and one division in this page's own JavaScript. Nothing is uploaded, nothing is stored, and the page works offline after it loads. A unit from another dimension, or a value that is not a number, is refused with the reason named rather than guessed at.
m³/h to Litres per Second converts cubic metres per hour (m³/h) to litres per second (L/s) with an exact factor: one litre per second is 3.6 cubic metres per hour. The rule on this page is L/s = m³/h ÷ 3.6.
The engine reads the value as one number, converts it through the flow rate base unit (L/s), and prints the answer to 6 decimal places with trailing zeros trimmed. A unit from another dimension is refused with both dimensions named.
Worked example: 18 m³/h gives 5 L/s.
How to use the m³/h to Litres per Second page
Type the value in the box, set From unit to m³/h and To unit to L/s, then press Run. The answer appears below the form.
Both menus offer the whole flow rate family (m³/s, L/min, L/s, m³/h, cfs, cfm, gpm, gpm-imp, bbl/day), so the page also answers the reverse direction without a second page.
- Value — one number, for example 18
- From unit — m³/h (cubic metres per hour)
- To unit — L/s (litres per second)
The factor this page applies
L/s = m³/h ÷ 3.6. One litre per second is 3.6 cubic metres per hour.
The factor is a definition, not a measurement: the page multiplies by it and divides by the target factor, so the same input always prints the same answer. The result is rounded to 6 decimal places and trailing zeros are trimmed.
- Base unit — L/s
- From factor — 0.2777777777777778 L/s per m³/h
- To factor — 1 L/s per L/s
What to Expect
Best for
- Converting one value when both units are already known
- Checking a m³/h to L/s figure by hand
- Reading a specification written in the other unit system
Not ideal for
- Converting a mixed list of units in one pass
- Anything that needs a certified or statutory table rather than a definition
What this tool keeps
- Your input in this tab
- The exact factor, printed on the page
- The same answer on every run
What may need cleanup
- A long decimal, rounded to 6 decimal places
- The unit label, which names the unit rather than converting it
Common errors
- A blank value is refused rather than read as zero
- A unit from another dimension is refused, never coerced
- Typing the unit symbol in the value box instead of the number
Example use cases
- A quick conversion while reading a spec sheet
- A second opinion on a m³/h to L/s figure
Sample input
18 m³/h
Sample output
5 L/s
Who this is for
- Students checking a conversion
- Anyone reading a specification that uses the other unit
Frequently asked questions
What factor does this page use?
One litre per second is 3.6 cubic metres per hour. The page applies L/s = m³/h ÷ 3.6 and prints 6 decimal places.
Which units can I choose?
The From and To menus offer the whole flow rate family: m³/s, L/min, L/s, m³/h, cfs, cfm, gpm, gpm-imp, bbl/day. The page opens on m³/h and L/s.
What happens if I type something that is not a number?
The page refuses it by name instead of reading it as zero. A unit from another dimension is refused the same way, with both dimensions named.
Is the value sent anywhere?
No. The conversion runs in this tab with JavaScript; nothing is uploaded, nothing is stored and the page works offline after it loads.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.