Depreciation Calculator screenshot

Depreciation Calculator

Print a straight-line or declining-balance depreciation schedule, with the method named and the book value floored at salvage.

Privacy First
0 Runs
Updated 2026-11-21
Runs in your browser
No sign-up, no upload

What the depreciation calculator does

It prints a year-by-year schedule for one asset under one of two methods. Straight-line divides the depreciable amount - cost minus salvage - evenly across the useful life, so 10,000 with a 1,000 salvage over 4 years is 2,250 a year and closes exactly on 1,000. Declining balance multiplies the opening book value by a rate you set, which front-loads the expense; it is floored at salvage, so the last year takes only what remains.

The method is printed with the schedule, along with the salvage floor. That floor is why a declining schedule can take a smaller final year: the book value never goes below salvage, whatever the rate would otherwise produce.

The page accepts a useful life of 1 to 50 whole years, refuses a salvage at or above the cost and refuses a declining rate outside 0 to 100 %. It does not know an asset's tax treatment or its market value, and it does not apply any statutory rule.

How to use it

Enter the asset cost in the text box and choose the Method.

Set the Salvage value and the Useful life in years; for declining balance, set the Declining rate as well, then press Run. The result prints one line per year and the final book value.

Worked example

Declining balance, cost 10,000, salvage 1,000, life 5, rate 40 %:

Year  Opening    Depreciation  Closing
   4    2160.00        864.00   1296.00
   5    1296.00        296.00   1000.00
Final book value: 1000.00 after 5 years

Why it runs in your browser

The schedule is computed in this tab. The cost and the assumptions are never uploaded.

Depreciation spreads an asset's cost across the years it is used. This page prints the year-by-year schedule for straight-line or declining balance, with the method named and the book value floored at salvage.

Straight-line divides cost minus salvage evenly. Declining balance multiplies the opening book value by a rate you set, so the expense is front-loaded and the last year takes only what remains above salvage.

The schedule, the method and the salvage floor are printed together, so the closing book value can be checked instead of trusted.

The two methods, and the floor they share

Straight-line is (cost - salvage) / life, the same expense every year. Its last year lands exactly on salvage because the depreciable amount was defined as cost minus salvage from the start.

Declining balance is opening book value x rate. It never depreciates more than the value still above salvage, so the final year is often smaller: 10,000 at 40 % with a 1,000 salvage runs 6,000, 3,600, 2,160, 1,296 and then a final 296, not 40 % of 1,296.

The life is 1 to 50 whole years. A salvage at or above the cost is refused because there is nothing to depreciate, and a declining rate outside 0 to 100 % is refused.

How to use Depreciation Calculator

Enter the asset cost into the text box and choose the Method.

Set the Salvage value and the Useful life in years; for declining balance, set the Declining rate as well.

Press Run. The result prints one line per year and the final book value after the last year with an expense.

What to Expect

Best for

  • Seeing how a method changes the expense in each year
  • Checking a book value against a schedule
  • Explaining why declining balance ends early

Not ideal for

  • Tax depreciation, which follows statutory rules the page does not hold
  • An asset whose market value or useful life is uncertain

What this tool keeps

  • The cost, salvage, life and rate you typed
  • Every year's opening, expense and closing value, printed

What may need cleanup

  • A mid-year convention, which the page does not apply
  • A salvage that is really an expected sale price

Common errors

  • A salvage at or above the cost
  • A life of zero
  • A declining rate of zero

Example use cases

  • Comparing two depreciation methods on one asset
  • Teaching the salvage floor with a worked schedule

Sample input

Cost 10,000, salvage 1,000, life 5, declining rate 40 %.

Sample output

Opening 1296.00, depreciation 296.00, closing 1000.00 in year 5.

Who this is for

  • Bookkeepers checking a fixed-asset schedule
  • Students learning the two methods

Frequently asked questions

Why is the last declining year smaller?

Because the book value cannot fall below salvage. The final expense is whatever remains above the floor, which is often less than the rate would otherwise produce.

Is this tax depreciation?

No. It is the two common book methods with the rate you supply. It does not apply any statutory rule, bonus allowance or convention.

What does a salvage of zero mean?

The asset is depreciated to zero. That is the default; enter a salvage value if the asset is expected to be worth something at the end of its life.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.