Extract Color Channels screenshot

Extract Color Channels

Split an image into its RGB, CMYK or HSL channels as separate images.

Privacy First
0 Runs
Updated 2026-11-07
Runs on the tool server
No account needed
Upload not stored after the run
Greyscale PNG per channel

Split a picture into one greyscale image per colour channel, with a contact sheet that shows them side by side. RGB gives the three primaries, CMYK the four inks a printer uses, and HSL the hue, saturation and lightness that a colour picker shows. The file is sent to the tool server for this run and is not stored.

Upload an image and choose a colour space — RGB, CMYK or HSL — and this page returns one greyscale PNG per channel, plus a contact sheet that lines them up side by side for comparison.

RGB gives red, green and blue; CMYK gives cyan, magenta, yellow and key; HSL gives hue, saturation and lightness. The contact sheet is named after the space, and each channel file is named after its own band.

The files are produced from the image's pixels on the tool server. The upload ceiling is 12 MB, and an image large enough to trip the decoder's decompression-bomb guard is refused rather than resized.

What each channel image contains

Each channel is written as an eight-bit greyscale PNG in which a brighter pixel means a higher value for that channel. That is the form a channel separation is normally inspected in.

The contact sheet is one image the full width of the original multiplied by the number of channels, with the bands pasted left to right in channel order. It is built for comparison, not for reconstruction.

The HSL set is produced from a per-pixel conversion to HSV and then read channel by channel, so its third band is HSV value rather than a true HSL lightness. On saturated colours the two differ.

  • RGB: red, green, blue
  • CMYK: cyan, magenta, yellow, key
  • HSL: hue, saturation, lightness
  • One contact sheet plus one PNG per channel

What a channel split is used for

It is a diagnostic: a colour cast shows up as one channel being systematically brighter, and a mask for a compositing job can often be built from a single channel.

It is not a separation for print. A CMYK split here is a conversion of an RGB image, not a profile-managed separation with ink limits and dot gain, and the channel files are greyscale rather than ink plates.

How to use the colour-space choice

Upload the image, within the 12 MB ceiling, choose RGB, CMYK or HSL, and run. RGB yields red, green and blue; CMYK adds key to cyan, magenta and yellow; HSL yields hue, saturation and lightness.

Download one greyscale PNG per channel plus the side-by-side contact sheet named after the space. Files come from the server's pixel read; an image tripping the decompression guard is refused rather than resized.

What to Expect

Best for

  • Finding which channel carries a colour cast
  • Making a greyscale mask from the channel with the most contrast
  • Comparing RGB, CMYK and HSL views of the same image

Not ideal for

  • A print-ready CMYK separation, which needs a colour profile
  • Animated or multi-frame images, of which only one frame is used
  • An image large enough to trip the decoder's decompression-bomb guard, which is refused

What this tool keeps

  • The original pixel dimensions in every channel image
  • Channel order, both in the file names and on the contact sheet
  • Eight-bit greyscale output for every band

What may need cleanup

  • The HSL lightness band, which is HSV value rather than true lightness
  • The CMYK conversion, which is not profile-managed
  • Transparency, which a channel image does not carry

Common errors

  • Reading the HSL lightness band as a true luminance map
  • Expecting four ink plates from the CMYK option
  • Uploading a very large image and reading the pixel refusal as a decode failure

Example use cases

  • Diagnosing a magenta cast in a product photo
  • Building a mask from the blue channel of a sky
  • Demonstrating channel separation in a class

Sample input

A 1200 by 800 JPEG with a blue sky, extracted as RGB.

Sample output

A contact sheet plus red, green and blue PNGs, with the blue band nearly white across the sky.

Who this is for

  • Photographers diagnosing colour casts
  • Designers building a mask from one channel
  • Students learning what a channel separation looks like

Frequently asked questions

What does a channel split return?

One greyscale PNG per channel for RGB, CMYK or HSL, plus a contact sheet that lines them up side by side.

Is the CMYK output a print-ready separation?

No. It is a channel split without a colour profile, so print work still needs a profiled conversion.

Why is the HSL lightness band not what I expected?

The third band is HSV value rather than true lightness, which the page states in its copy.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.