Heat Capacity / Energy Calculator
Calculate the heat energy needed to change a sample's temperature with q = mc dT.
Heat energy from mass, specific heat and temperature change
The page evaluates q = m c dT with mass in grams, specific heat capacity in J/(g*degC) and the temperature change in degrees Celsius. A hundred grams of water raised 25 degrees at 4.18 takes 10450 joules, which the page also prints as 10.45 kilojoules.
Mass and specific heat must be above zero. The page does not care whether the temperature change is a rise or a fall: type a negative change and q comes back negative, which is heat released. The specific heat is whatever you type, so the page works for any material without carrying a table.
The multiplication is the whole computation. Nothing is stored, nothing leaves the browser, and the same three figures print the same energy on every reload.
The page evaluates q = m·c·ΔT with mass in grams, specific heat capacity in J/(g·°C) and the temperature change in degrees Celsius, and prints the heat energy in joules with a kilojoule line beside it. A hundred grams of water raised 25 °C at 4.18 J/(g·°C) takes 10450 J.
It assumes no phase change: while a sample melts or boils, heat goes into the transition at constant temperature and this product does not describe what happens. The specific heat is whatever you type, so no material table is consulted.
How to use it
Enter the mass in grams, the specific heat in J/(g·°C) and the temperature change in degrees Celsius, then press Run. A rise is a positive change and a fall a negative one; the page keeps the sign rather than taking an absolute value.
- Enter mass in grams, not kilograms.
- Enter specific heat in J/(g·°C) — water is 4.18.
- Enter ΔT as final minus initial, negative if the sample cooled.
The arithmetic, and where it stops
Three numbers multiply, so the answer is linear in each and the sign of ΔT decides the sign of q: 100 × 4.18 × 25 = 10450 J. Because specific heat in J/(g·°C) already contains grams and degrees, no unit conversion is needed — but a value quoted in J/(kg·K) must be divided by a thousand before it is typed.
Mass and specific heat must be above zero, because a sample of no mass or a material with no capacity has nothing to compute. A negative temperature change is not refused: it is heat released, and it prints as a negative q.
What to Expect
Best for
- Working out how much heat a known mass needs for a temperature change.
What this tool keeps
- The multiplication happens in this tab; the material data you type is never uploaded. The same figures give the same result after a reload.
Sample input
100, 4.18, 25
Sample output
q = 10450 J = 10.45 kJ
Frequently asked questions
How do I use the Heat Capacity / Energy Calculator?
Enter the mass in grams, the specific heat in J/(g·°C) and the temperature change in degrees Celsius, then press Run. A rise is a positive change and a fall a negative one; the page keeps the sign rather than taking an absolute value.
Does anything leave my browser?
No. The multiplication happens in this tab; the material data you type is never uploaded. Reloading the page discards every value you entered.
Which inputs does it refuse?
Mass and specific heat must be above zero, because a sample of no mass or a material with no capacity has nothing to compute. A negative temperature change is not refused: it is heat released, and it prints as a negative q.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.