RC Time Constant Calculator screenshot

RC Time Constant Calculator

Find the time constant τ = R·C of a resistor-capacitor pair and the corner frequency of the filter it makes.

Privacy First
0 Runs
Updated 2026-11-06
No upload
Instant
No signup

τ = R·C and its corner

Enter a resistance in kilohms and a capacitance in microfarads. Because a kilohm times a microfarad is a millisecond, the page multiplies the two numbers and scales by 10⁻³ to get τ in seconds; it then prints the −3 dB corner of the one-pole filter, f = 1/(2πτ). Ten kilohms with 100 microfarads gives τ = 1 s and a corner at 0.159155 Hz, with both lines shown.

The pair is treated as an ideal first-order RC network: a perfect resistor, a perfect capacitor, no parasitic inductance and no load on the output. A real electrolytic capacitor has a tolerance of tens of percent and its capacitance drifts with temperature and age, so the measured time constant can sit well away from this figure. A zero resistance or zero capacitance is refused, since the time constant would be zero and the corner would divide by it.

The multiplication runs in this tab from the two values you enter. Nothing is uploaded, no component is stored, and reloading prints the same constant.

The time constant of a one-pole RC network: τ = R·C, with the resistance in kilohms and the capacitance in microfarads so kΩ × µF reads directly in milliseconds. The page also prints the corner frequency f = 1/(2πτ); 10 kΩ and 100 µF give τ = 1 s.

The pair is treated as ideal: no parasitic inductance, no output load, no tolerance. A zero resistance or zero capacitance is refused, because the constant would be zero and the corner would divide by it.

How to use it

Enter the resistance in kilohms and the capacitance in microfarads, then press Run. The first line is the time constant in seconds, the second repeats the multiplication, and the third gives the −3 dB corner of the filter the pair makes.

The arithmetic

A kilohm is 10³ Ω and a microfarad is 10⁻⁶ F, so their product is 10⁻³ s: the page multiplies the two numbers and scales by 10⁻³. The corner is one over two pi times the constant, which is where the capacitive reactance equals the resistance.

Where it stops

Real electrolytic capacitors carry a tolerance of tens of percent and drift with temperature and age, so a measured constant can sit well away from this figure. The page does not model a driven load, a second pole or the charging curve itself, and it refuses zero values rather than printing an infinite corner.

What to Expect

Best for

  • Choosing an RC pair for a filter.
  • Seeing the corner frequency beside the constant.

What this tool keeps

  • The two component values are computed in the browser and never posted, so the page works offline and retains nothing.

Sample input

10 kΩ and 100 µF

Sample output

τ = 1 s τ = R·C = 10 kΩ × 100 µF Corner frequency f = 1/(2πτ) = 0.159155 Hz

Frequently asked questions

How do I use it?

Type the resistance in kilohms and the capacitance in microfarads, then press Run. The time constant and the corner frequency are printed with the multiplication shown.

Is anything uploaded?

No. The arithmetic runs in this tab with JavaScript: no request is made, no account is needed, nothing is stored, and the page keeps working offline once loaded.

What are its limits?

Both values must be above zero, and the result is the ideal first-order figure: a real capacitor’s tolerance and drift are not included in it.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.