Spring Constant Calculator
Spring constant k = F / x from one or more measured force and extension pairs, in N/m and N/mm.
What the spring constant calculator does
It solves Hooke's law for the stiffness: k = F / x. A force of 20 N at an extension of 0.1 m is 200 N/m, which the page also prints as 0.2 N/mm. Each line of the text box is one measurement, so a lab set of pairs is evaluated line by line, and more than one pair also prints the arithmetic mean of the per-line estimates.
Magnitudes are used. The sign belongs to the force, not to the spring, so the page asks for the size of the force and the size of the extension and refuses a negative value by name. A zero extension is refused because k = F / x would divide by zero, and a zero force is refused because it measures nothing.
The answer is the stiffness in the linear region. A spring stretched past its elastic limit is not one constant, which the page states instead of implying a material property. Up to 1000 pairs are accepted.
Numbers print to ten significant figures with trailing zeros trimmed.
How to use it
Enter one force and extension pair per line in the text box, in the order force, extension, with force in newtons and extension in metres.
Press Run. Each line prints its own k in N/m and N/mm, and a set of pairs also prints the mean estimate the pairs support.
Worked example
Input:
20, 0.1
Output:
Line 1: k = 20 / 0.1 = 200 N/m (0.2 N/mm)
Why it runs in your browser
The division runs on this page. Your measurements are never uploaded and nothing is kept after the tab closes.
The spring constant is the stiffness in Hooke's law: the force a spring exerts per metre of extension. The page solves that relation for the stiffness, k = F / x, from a force and the extension it produced.
Each line of the input is one measurement, so a lab set is evaluated line by line and a set of pairs also prints the mean of the per-line estimates. A 20 N force at a 0.1 m extension is 200 N/m, which is 0.2 N/mm.
Magnitudes are used, because the sign belongs to the force and not to the spring. A zero extension is refused rather than divided by, and the answer is stated as the stiffness in the linear region.
What the stiffness means
A spring constant of 200 N/m says the spring pushes or pulls with 200 N for every metre it is displaced from its rest length. Doubling the extension doubles the force while the spring stays in its linear region, which is the assumption the page states.
Past the elastic limit the force stops rising proportionally, so a single number no longer describes the spring. A measurement taken there would give a stiffness that changes with the load, and the page cannot detect that from one pair.
Reading several measurements together
One force and one extension give one estimate. Several pairs print one estimate each, plus their arithmetic mean, which is a convenience rather than a least-squares fit: a pair with a large extension carries the same weight as a small one in this summary.
The extension is measured from the rest length, not from zero on a ruler. A spring hanging under its own weight is already extended by that weight, which the page does not know and does not guess.
How to use Spring Constant Calculator
Enter one `force, extension` pair per line in the text box, with the force in newtons and the extension in metres.
Press Run. Each line prints its own stiffness in N/m and N/mm, so a line with a typo is visible beside the others.
Compare the per-line estimates in the text box: a set that scatters widely was taken outside the linear region, or measured without a settled rest length.
What to Expect
Best for
- Turning a measured force and extension into a stiffness
- Checking several measurements from one spring
- A physics lab report's k value in N/m and N/mm
Not ideal for
- A spring stretched past its elastic limit, where k is not constant
- A multi-spring assembly, where the effective stiffness is a combination the page does not compute
What this tool keeps
- Every pair in the order you entered it
- The per-line quotient and, for more than one pair, the mean
What may need cleanup
- An extension in centimetres or millimetres, which has to be converted to metres
- A force in kilograms-force, which has to be converted to newtons
Common errors
- Typing a negative extension for a compression
- Measuring the extension from zero on a ruler rather than from the rest length
Example use cases
- A Hooke's law experiment
- Sizing a spring for a known load and travel
- Checking a purchased spring's stated rate
Sample input
A force of 20 N at an extension of 0.1 m.
Sample output
k = 20 / 0.1 = 200 N/m (0.2 N/mm).
Who this is for
- Students measuring a spring in a lab
- Anyone checking a spring's stated rate
Frequently asked questions
Why is the extension measured from the rest length?
Hooke's law describes the displacement from the spring's unloaded length. A spring hanging under its own weight is already displaced by that weight, so the ruler reading has to be taken against the loaded rest position.
Why does the page refuse a negative extension?
It reports a magnitude, and the sign of a force belongs to the direction of the displacement. Enter the size of the extension whether the spring is stretched or compressed; the stiffness magnitude is the same.
Is the mean the best estimate?
It is a convenience, not a fit. A least-squares slope through the origin is the better estimator for several measurements, and the page says which one it prints.
What units does the answer use?
Newtons per metre, the SI unit, with newtons per millimetre beside it for a spring spec sheet. One N/m is 0.001 N/mm.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.