Swimming Stroke Rate Counter
Convert a stroke count and a counting interval into strokes per minute and seconds per stroke.
Stroke rate is strokes divided by minutes, and one stroke cycle takes 60 divided by the rate in seconds. The page prints both, plus the count and the interval it used.
The stroke count and the interval must both be above 0; a count of 0 is refused because a rate with no strokes has no divisor. There is no sensor and no clock here — the count is whatever you tallied at the wall.
Both numbers come from the form, so a reload prints the same rate.
Stroke rate is strokes divided by minutes, and the page also prints the seconds one stroke takes: 30 strokes in 1:00 is 30.0 strokes/min, one every 2.00 s. The count and the interval are whatever you observed.
There is no sensor and no clock in the page, so the interval is the one you timed. A stroke count or interval of zero is refused because the rate divides by both.
How to use it
Enter the strokes counted and the interval you counted over as mm:ss, then press Run. Three lines: the rate per minute, the seconds per stroke and the two figures restated.
The arithmetic
The interval is converted to minutes, then divided into the stroke count. The seconds-per-stroke line is 60 divided by the rate, so the two outputs always agree with each other.
What to Expect
Best for
- Converting a hand-counted stroke tally into a rate you can compare across sessions.
What this tool keeps
- The rate per minute, the seconds per stroke and the counted interval.
Sample input
30 strokes in 1:00.
Sample output
Stroke rate = 30.0 strokes/min One stroke every 2.00 s 30 strokes in 1:00
Frequently asked questions
How long should I count for?
Long enough to be typical — 20 to 30 seconds is common, and a full minute is easier to time. A short interval catches one awkward stroke cycle and skews the rate.
Does it count my strokes for me?
No. The page has no camera, no accelerometer and no clock: you count the strokes and time the interval, and it does the division.
Can I enter an interval in minutes?
The interval field takes mm:ss, so one minute is 1:00 and thirty seconds is 0:30. A bare 1 is not a time and is refused; the count and interval live only in the fields of the open tab.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.