Tile Count Calculator
Work out how many tiles a floor needs: tiles across and down from the room and tile size plus grout, then a waste allowance.
What the Tile Count Calculator does
Tiles across is the room width divided by tile width plus grout, rounded up, and tiles down is the same with the other dimension. The product is the count before waste; the allowance is that count times the waste percentage, rounded up, so the answer is a whole number of tiles.
Every input is checked as a positive number of millimetres. A zero tile, a negative room or a waste above 100% is refused with the field named.
This counts tiles, not coverage: a cut tile at the edge still counts as one, which is why waste exists. The grout line is not subtracted from the room — a perimeter gap is part of the waste allowance, not a separate term. For a diagonal or herringbone layout the waste needs to be higher by hand.
How to use it
Set Tile width (mm), Tile height (mm), Room width (mm), Room height (mm), Grout (mm) and Waste (%), or press Run with the defaults.
Read the Tile count below: the two directions, the product, the allowance and the number to buy.
Check the Tile count Grid line — it restates the division, so the count can be re-done on paper.
Worked example
Input:
Output:
Tiles across: 12
Tiles down: 9
Tiles before waste: 108
Waste allowance (10%): 11
Tiles to buy: 119
Grid: 2400 mm / (200 mm tile + 3 mm grout) = 12 across
Why it runs in your browser
The result is produced on this page with JavaScript, so it works offline after the page loads and nothing you enter is sent anywhere.
A tile count with every term printed: tiles across, tiles down, the product, the waste allowance and the number to buy.
Grout is inside the arithmetic — a 200 mm tile with 3 mm grout occupies 203 mm of the run — so the count matches the layout rather than the bare measurements.
What it does, and what it does not
Tiles across is the room width divided by tile width plus grout, rounded up, and tiles down is the same with the other dimension. The product is the count before waste; the allowance is that count times the waste percentage, rounded up, so the answer is a whole number of tiles.
Every input is checked as a positive number of millimetres. A zero tile, a negative room or a waste above 100% is refused with the field named.
This counts tiles, not coverage: a cut tile at the edge still counts as one, which is why waste exists. The grout line is not subtracted from the room — a perimeter gap is part of the waste allowance, not a separate term. For a diagonal or herringbone layout the waste needs to be higher by hand.
How to use Tile Count Calculator
Set Tile width (mm), Tile height (mm), Room width (mm), Room height (mm), Grout (mm) and Waste (%), or press Run with the defaults.
Read the Tile count below: the two directions, the product, the allowance and the number to buy.
Check the Tile count Grid line — it restates the division, so the count can be re-done on paper.
What to Expect
Best for
- Ordering tiles for a rectangular room
- Seeing how grout changes the count
Not ideal for
- A diagonal or herringbone layout, which needs more waste
- An L-shaped room, which needs splitting into rectangles
What this tool keeps
- Grout inside the division
- Whole tiles, never a fraction
What may need cleanup
- Raise the waste percentage for cuts by hand
- Split an irregular room into rectangles first
Common errors
- The page refuses it: tile width must be a positive number of millimetres
Example use cases
- Ordering tiles for a bathroom floor
- Checking a tiler's quantity
Sample input
Room and tile sizes:
Sample output
Tile count: Tiles across: 12 …
Who this is for
- Anyone tiling a floor
- Builders quoting a job
Frequently asked questions
Why is grout added to the tile size?
Because the tile plus its grout line is the space one tile occupies in the run. Dividing by the tile alone under-counts every row by the width of its joints.
How is the waste percentage applied?
To the tile count, not the area: the count is multiplied by the percentage and rounded up. That keeps the answer a whole number of tiles to buy.
Does a cut tile count as a whole tile?
Yes. Each position in the grid is one tile whether it is cut or not, which is exactly why the waste allowance exists.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.