Video Converter screenshot

Video Converter

Convert a video to MP4 with H.264 video and AAC audio, at up to 1920 pixels wide. Accepts 20 MB and 2 minutes.

Privacy First
0 Runs
Updated 2026-11-07
Runs on the tool server
No account needed
The upload is not stored
The output is probed

What the converter produces

Every accepted upload comes back as an MP4 carrying H.264 video and AAC audio, scaled so its long edge is at most 1920 pixels. H.264 is the format every browser, phone and television plays, which is why the output does not try to keep the input container: a Matroska or WebM file that plays on your laptop can be unplayable on a TV, and the point of a conversion is to remove that question.

The input is identified by probing its container and streams, not by its name. A file with the wrong extension still converts if ffmpeg can decode it, and a text file named holiday.mp4 is refused before any encoder starts.

How to use it

Choose a file, press Run, and download the MP4 when it appears. The summary reports the input and output sizes, the durations and the frame size, so the result is measured rather than described.

Limits

20 MB per upload, 2 minutes of duration, 24 MB of output and 180 seconds of processing. A file outside those is refused with the measured number and the limit, rather than running until something gives up.

Honest about quality

This is a re-encode at CRF 23 with the veryfast preset: visually close to the source for ordinary footage, but not lossless, and one generation of re-encoding is still a generation. If you need the original bits unchanged, mute-video is the tool that copies the video stream; this one does not.

Upload a video and the server re-encodes it to an MP4 with H.264 video and AAC audio, scaled so its long edge is at most 1920 pixels, then returns the file with both byte counts and a note on what changed.

The input is identified by its container through ffprobe, not by its extension, so a mislabelled file is handled by what it actually is. A file ffprobe cannot decode is refused before any encoder runs.

Only the first video stream and the first audio stream are mapped, and the encode is a re-encode. Subtitles, extra audio tracks, chapters and data streams are not carried into the MP4.

The output format

Video is H.264 at CRF 23 with the veryfast preset, yuv420p for broad compatibility, and a 128 kbit/s AAC audio track when the input has audio. The MP4 index is written first, which helps a browser start playback before the file is complete.

Scaling happens only above the 1920-pixel long edge; a smaller video is not enlarged. The summary names the old and new dimensions when they differ, so an unexpected scale is visible rather than silent.

  • Output: MP4, H.264 and AAC
  • Long edge at most 1920 pixels
  • Input: 20 MB and 2 minutes

What is dropped

A second audio track, a subtitle stream or a chapter list has no place in this output, because the command maps one video and one optional audio stream. If any of those matter, the source should be kept alongside the converted file.

The conversion is not lossless. A video already encoded efficiently can look slightly softer and come out a different size, which is the expected cost of moving it to a standard container and codec.

How to use the upload

Choose the clip in the Upload step and press Run; ffprobe identifies the container by its contents, so a mislabelled extension is handled by what the file actually is. The server maps the first video and first audio streams and returns an MP4 scaled to at most 1920 pixels on the long edge.

Read the summary for both byte counts and any dimension change before keeping the file. Subtitles, extra audio tracks and chapters are dropped by design, so keep the source file when any of those must survive.

What to Expect

Best for

  • Making a clip play in a browser or a phone
  • Standardising a mix of formats into MP4
  • Scaling a large video down to 1080p

Not ideal for

  • Keeping subtitles, chapters or extra audio tracks
  • A lossless remux of a file that is already H.264 in MP4
  • A clip over 20 MB or two minutes

What this tool keeps

  • The duration and frame timing
  • The aspect ratio, with scaling only above the long-edge cap
  • The first audio track when one is present

What may need cleanup

  • Subtitles and extra tracks, which are not copied
  • Visible re-encode softness on an already compressed source
  • A rotated phone video, whose orientation metadata may be baked in

Common errors

  • Expecting a subtitle track to survive the conversion
  • Uploading a 50 MB file and reading the limit as a format error
  • Assuming an MKV with several audio tracks keeps them all

Example use cases

  • Converting a screen recording for the web
  • Making a camera clip play on a phone
  • Producing a standard MP4 from a mixed set

Sample input

A 30-second MOV file from a camera, 8 MB, with one video and one audio stream.

Sample output

An MP4 with H.264 video and AAC audio, unchanged duration, and a summary reporting both sizes and any dimension change.

Who this is for

  • Anyone with a clip that will not play
  • Content teams standardising formats
  • Developers preparing a web video

Frequently asked questions

What format does the video converter produce?

An MP4 with H.264 video and AAC audio, scaled so the long edge is at most 1920 pixels.

Does it keep subtitles or extra audio tracks?

No. Subtitles, chapters and extra audio tracks are dropped, and the first audio track is kept.

Is it a lossless remux?

No. The file is re-encoded, so an already compressed source can lose a little softness.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.