VO2 to Calorie Burn Conversion
Convert VO2 in mL/kg/min plus body mass and minutes into an estimated calorie burn.
One litre of oxygen releases about 5 kcal, so the page computes VO2 times kilograms divided by 1000 litres per minute, multiplies by 5 and then by the minutes you enter. The litre rate is printed with the result.
VO2, weight and duration must all be above 0; a VO2 of 0 is refused because it would print a burn of nothing. The 5 kcal per litre figure is a population constant, so the page presents the answer as an estimate.
Three typed values produce one multiplication chain, so the same session prints the same estimate on every reload.
One litre of oxygen releases about 5 kcal, so the page computes kcal = VO₂ × kg ÷ 1000 × 5 × minutes. A VO₂ of 40 mL/kg/min at 70 kg for 30 minutes gives about 420 kcal.
The conversion assumes a steady VO₂ for the whole duration and a respiratory quotient near the 5 kcal/L figure. A VO₂, weight or duration of zero is refused.
How to use it
Enter the VO₂ in mL/kg/min, your weight in kilograms and the duration in minutes, then press Run. The output is the estimated kcal, the litres of oxygen per minute and the final multiplication.
The arithmetic
VO₂ × kg converts millilitres per kilogram into millilitres per minute, and ÷ 1000 makes that litres. Five kilocalories per litre times the minutes gives the total, so the estimate is linear in all three inputs.
What to Expect
Best for
- Turning a VO₂ figure into the energy a session at that rate would cost.
What this tool keeps
- The estimated kcal, the litres per minute and the full multiplication.
Sample input
VO₂ 40, 70 kg, 30 minutes.
Sample output
≈ 420 kcal VO₂ 40 mL/kg/min × 70 kg ÷ 1000 = 2.80 L/min 2.80 L/min × 5 kcal/L × 30 min
Frequently asked questions
Where does 5 kcal per litre come from?
It is the energy released per litre of oxygen at a typical respiratory quotient, and the output prints it. A different fuel mix shifts the figure by a few percent, which is why the result is an estimate.
Does it use my measured VO₂?
It uses the VO₂ you type. If you have a lab or field-test value, enter it; otherwise the figure is only as good as the number you supply.
Is the whole session at one VO₂?
The arithmetic assumes so. Intervals that swing between easy and hard are not modelled, and the page does not average a session for you.
Is my VO2 value uploaded?
No. The three figures stay in this tab and the conversion runs there with JavaScript.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.