Estimated Average Glucose (eAG) Converter screenshot

Estimated Average Glucose (eAG) Converter

Convert NGSP HbA1c to estimated average glucose in mmol/L and mg/dL with the ADAG regression.

Privacy First
0 Runs
Updated 2026-11-06
No upload
Instant
No signup

HbA1c to average glucose

Enter HbA1c in NGSP percent. Average glucose is 28.7 × A1c − 46.7 mg/dL, divided by 18.0182 for mmol/L. The page prints mmol/L first, then mg/dL, then the substituted arithmetic.

The regression was fitted on group data, so one person can sit either side of it; the page does not present the figure as that person measured glucose. Values above 20 percent, and values below the 1.63 percent at which the line crosses zero, are refused. This is arithmetic aid for a qualified reader, not a diagnosis or medical advice.

The two conversions are closed-form and depend only on the value typed. A reload recomputes them identically, and the page keeps no copy of the input.

The page applies the ADAG regression to an NGSP HbA1c percent: average glucose = 28.7 × A1c% − 46.7 in mg/dL, divided by 18.0182 for mmol/L. Both glucose figures are printed, with the regression written out.

It converts a percentage into two glucose units and shows the line, so the 46.7 offset is visible rather than absorbed into the result.

How to use it

Enter the HbA1c in NGSP percent and press Run. The output prints the average glucose in mmol/L and in mg/dL plus the substitution. Values above 20 % are refused as beyond the fitted range, and values low enough to give a non-positive glucose are refused too.

The arithmetic

An HbA1c of 7 % gives 28.7 × 7 − 46.7 = 154.2 mg/dL, which is 8.558 mmol/L at 18.0182 mg/dL per mmol/L. The regression is a straight line with a negative intercept, so it crosses zero at about 1.63 %: below that it would report a negative concentration, which the page refuses instead.

Where the page stops

The page does not compare the figure with a target, does not convert the HbA1c itself (the IFCC page does that), and does not carry a confidence interval for the regression. It prints the number the line gives.

What to Expect

Best for

  • Converting a percentage HbA1c into average glucose in both units.

What this tool keeps

  • Both units and the regression line are printed together.

What may need cleanup

  • Nothing: the two glucose figures are the complete output.

Sample input

HbA1c 7 %

Sample output

eAG = 8.558 mmol/L = 154.2 mg/dL 28.7 × 7 − 46.7 = 154.2 mg/dL; ÷ 18.0182 = 8.558 mmol/L

Frequently asked questions

How do I use the estimated average glucose converter?

Enter the HbA1c in NGSP percent — the percentage form, not mmol/mol — then press Run. The page prints the average glucose in both units and the regression line with your number in it.

Is anything uploaded when I press Run?

No. The arithmetic runs in this tab with JavaScript: nothing is posted to a server, nothing is stored, and reloading the page discards both the input and the result.

My lab reports HbA1c in mmol/mol. Can I use this page?

Not directly: this page takes the percentage form. The average blood glucose from HbA1c page on this site converts an IFCC value into that percentage first and then applies the same regression, so use that one if your result is in mmol/mol.

Is this a diagnosis or medical advice?

No. It is an arithmetic aid for a qualified reader: the page prints the formula's output and the numbers behind it, and leaves interpretation, and any decision taken from it, to someone qualified to make it. It is not a diagnosis and not medical advice.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.