FFMI Calculator screenshot

FFMI Calculator

Compute fat-free mass index from bodyweight, height and body-fat percentage, with the normalised figure at 1.8 metres.

Privacy First
0 Runs
Updated 2026-11-22
Runs in your browser
No upload
Deterministic
Formula stated

What this page does

FFMI divides fat-free mass by height squared, so muscularity can be compared between people of different heights; the normalised form adjusts every result to a 1.8 m reference.

How to use it

Enter this sample with the defaults shown:

80

Press Run. The page gives:

Bodyweight:    80 kg
Height:        180 cm
Body fat:      15 %
Lean mass:     68 kg
FFMI:          20.9877
Normalised:    20.9877 (height-adjusted to 1.8 m)
Basis:         lean mass ÷ height², with the 6.1 × (1.8 − height) normalisation

The formula and its basis

Lean mass = bodyweight × (1 − body-fat percentage ÷ 100). FFMI = lean mass ÷ height in metres². Normalised FFMI = FFMI + 6.1 × (1.8 − height in metres).

Bodyweight in kilograms and height in centimetres, as entered; body fat is the percentage you supply, which may come from a tape estimate. FFMI prints to four decimals and intermediate values are never rounded.

What it is not

This page is arithmetic on the numbers you enter, with each assumption stated: it is not financial, medical or training advice, and nothing is uploaded, stored or logged.

FFMI divides fat-free mass by height squared, so muscularity can be compared between people of different heights; the normalised form adjusts every result to a 1.8 m reference.

The rule this page applies: Lean mass = bodyweight × (1 − body-fat percentage ÷ 100). FFMI = lean mass ÷ height in metres². Normalised FFMI = FFMI + 6.1 × (1.8 − height in metres).

Basis: Bodyweight in kilograms and height in centimetres, as entered; body fat is the percentage you supply, which may come from a tape estimate. FFMI prints to four decimals and intermediate values are never rounded.

Worked example: the sample values below, with the defaults, give exactly the output recorded in What to Expect.

How to use the FFMI Calculator

Enter bodyweight in kg in the box, set the options beside it, then press Run. The answer appears beside the form and re-runs on the same input.

Every number in the answer follows from your inputs and the assumptions stated below; the page does not choose a rate for you.

The worked example uses "80" with the defaults shown, and its exact output is printed in What to Expect.

The formula, its basis and its refusals

Lean mass = bodyweight × (1 − body-fat percentage ÷ 100). FFMI = lean mass ÷ height in metres². Normalised FFMI = FFMI + 6.1 × (1.8 − height in metres).

Bodyweight in kilograms and height in centimetres, as entered; body fat is the percentage you supply, which may come from a tape estimate. FFMI prints to four decimals and intermediate values are never rounded. Money prints to two decimals, percentages and ratios to four, and intermediate values are never rounded.

It refuses a bodyweight of zero or less, a height outside 100 to 250 cm, and a body-fat percentage outside 0 to 70.

What this page is not

It is arithmetic on the numbers you enter, with each assumption stated. It is not a training prescription, a medical measurement or a health-risk assessment, and it does not replace a coach or a clinician.

Where the tool is the wrong choice: A medical assessment of body composition; A body-fat measurement: the page uses the percentage you enter.

What to Expect

Best for

  • Comparing muscularity across heights
  • Tracking lean-mass change while weight holds
  • Reading a body-composition estimate in context

Not ideal for

  • A medical assessment of body composition
  • A body-fat measurement: the page uses the percentage you enter

What this tool keeps

  • The numbers exactly as you entered them
  • The same answer on every run
  • Nothing sent, stored or logged

What may need cleanup

  • Units mixed between fields: enter kilograms and centimetres as each label says
  • A comma used as a decimal separator, which the page refuses by name

Common errors

  • It refuses a bodyweight of zero or less, a height outside 100 to 250 cm, and a body-fat percentage outside 0 to 70.
  • A non-numeric value, which the page names rather than silently treating as zero

Example use cases

  • Following a lean-gain block
  • Comparing two athletes of different heights

Sample input

80

Sample output

Bodyweight: 80 kg Height: 180 cm Body fat: 15 % Lean mass: 68 kg FFMI: 20.9877 Normalised: 20.9877 (height-adjusted to 1.8 m) Basis: lean mass ÷ height², with the 6.1 × (1.8 − height) normalisation

Who this is for

  • Lifters and athletes tracking body composition

Frequently asked questions

What formula does this page use?

Lean mass = bodyweight × (1 − body-fat percentage ÷ 100). FFMI = lean mass ÷ height in metres². Normalised FFMI = FFMI + 6.1 × (1.8 − height in metres).

What does it refuse?

It refuses a bodyweight of zero or less, a height outside 100 to 250 cm, and a body-fat percentage outside 0 to 70.

What does this page not do?

It is arithmetic on the numbers you enter, with each assumption stated. It is not a training prescription, a medical measurement or a health-risk assessment, and it does not replace a coach or a clinician.

What rate basis and rounding does it use?

Bodyweight in kilograms and height in centimetres, as entered; body fat is the percentage you supply, which may come from a tape estimate. FFMI prints to four decimals and intermediate values are never rounded. Money prints to two decimals, percentages and ratios to four, and intermediate values are never rounded.

Where does the normalised figure come from?

It adds 6.1 × (1.8 − height in metres), so a shorter lifter's FFMI is adjusted to what it would be at 1.8 m and scores from different heights can be compared.

Does it measure body fat?

No. You enter the body-fat percentage, for example from a tape-based estimate; the page computes FFMI from it.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.