Hiking Time Calculator screenshot

Hiking Time Calculator

Estimate a hike's moving time from distance, ascent, pace and climbing rate, plus ten minutes of break for each hour.

Privacy First
0 Runs
Updated 2026-11-22
Runs in your browser
No upload
Deterministic
Formula stated

What this page does

Naismith's rule adds the time to walk the distance at your flat pace to the time to climb the ascent at your climbing rate, then allows ten minutes of break per hour.

How to use it

Enter this sample with the defaults shown:

12

Press Run. The page gives:

Distance:      12 km
Ascent:        600 m
Flat time:     2:40 at 4.5 km/h
Climb time:    1:00 at 600 m/h
Moving time:   3:40
With breaks:   4:16 (10 minutes per hour of moving)
Basis:         Naismith's rule; descent, terrain and altitude are not modelled

The formula and its basis

Flat time = distance ÷ flat pace. Climb time = ascent ÷ ascent rate. Moving time = flat time + climb time. Time with breaks = moving time × 7 ÷ 6.

Distance, ascent, pace and climbing rate are as entered; the result is hours and minutes. Descent, terrain, altitude and pack weight are not modelled. Times print as h:mm and intermediate values are never rounded.

What it is not

This page is arithmetic on the numbers you enter, with each assumption stated: it is not financial, medical or training advice, and nothing is uploaded, stored or logged.

Naismith's rule adds the time to walk the distance at your flat pace to the time to climb the ascent at your climbing rate, then allows ten minutes of break per hour.

The rule this page applies: Flat time = distance ÷ flat pace. Climb time = ascent ÷ ascent rate. Moving time = flat time + climb time. Time with breaks = moving time × 7 ÷ 6.

Basis: Distance, ascent, pace and climbing rate are as entered; the result is hours and minutes. Descent, terrain, altitude and pack weight are not modelled. Times print as h:mm and intermediate values are never rounded.

Worked example: the sample values below, with the defaults, give exactly the output recorded in What to Expect.

How to use the Hiking Time Calculator

Enter distance in km in the box, set the options beside it, then press Run. The answer appears beside the form and re-runs on the same input.

Every number in the answer follows from your inputs and the assumptions stated below; the page does not choose a rate for you.

The worked example uses "12" with the defaults shown, and its exact output is printed in What to Expect.

The formula, its basis and its refusals

Flat time = distance ÷ flat pace. Climb time = ascent ÷ ascent rate. Moving time = flat time + climb time. Time with breaks = moving time × 7 ÷ 6.

Distance, ascent, pace and climbing rate are as entered; the result is hours and minutes. Descent, terrain, altitude and pack weight are not modelled. Times print as h:mm and intermediate values are never rounded. Money prints to two decimals, percentages and ratios to four, and intermediate values are never rounded.

It refuses a distance of zero or less, a negative ascent, and a pace or climbing rate of zero or less.

What this page is not

It is arithmetic on the numbers you enter, with each assumption stated. It is not a training prescription, a medical measurement or a health-risk assessment, and it does not replace a coach or a clinician.

Where the tool is the wrong choice: A safety plan for remote or winter terrain, which needs more than arithmetic; Turn-by-turn navigation.

What to Expect

Best for

  • Planning a day hike's daylight budget
  • Checking whether a route fits before dark
  • Comparing two ascent rates

Not ideal for

  • A safety plan for remote or winter terrain, which needs more than arithmetic
  • Turn-by-turn navigation

What this tool keeps

  • The numbers exactly as you entered them
  • The same answer on every run
  • Nothing sent, stored or logged

What may need cleanup

  • Units mixed between fields: enter kilograms and centimetres as each label says
  • A comma used as a decimal separator, which the page refuses by name

Common errors

  • It refuses a distance of zero or less, a negative ascent, and a pace or climbing rate of zero or less.
  • A non-numeric value, which the page names rather than silently treating as zero

Example use cases

  • Estimating a hillwalk's duration
  • Deciding whether to start a route late

Sample input

12

Sample output

Distance: 12 km Ascent: 600 m Flat time: 2:40 at 4.5 km/h Climb time: 1:00 at 600 m/h Moving time: 3:40 With breaks: 4:16 (10 minutes per hour of moving) Basis: Naismith's rule; descent, terrain and altitude are not modelled

Who this is for

  • Hikers, walkers and trip planners

Frequently asked questions

What formula does this page use?

Flat time = distance ÷ flat pace. Climb time = ascent ÷ ascent rate. Moving time = flat time + climb time. Time with breaks = moving time × 7 ÷ 6.

What does it refuse?

It refuses a distance of zero or less, a negative ascent, and a pace or climbing rate of zero or less.

What does this page not do?

It is arithmetic on the numbers you enter, with each assumption stated. It is not a training prescription, a medical measurement or a health-risk assessment, and it does not replace a coach or a clinician.

What rate basis and rounding does it use?

Distance, ascent, pace and climbing rate are as entered; the result is hours and minutes. Descent, terrain, altitude and pack weight are not modelled. Times print as h:mm and intermediate values are never rounded. Money prints to two decimals, percentages and ratios to four, and intermediate values are never rounded.

What is Naismith's rule?

A rule of thumb that gives one hour for every 5 km walked plus one hour for every 600 m of ascent, generalised here to the pace and climbing rate you enter.

Does it include descent?

No. Descent time varies with knees and terrain and is not modelled, so add it from your own experience.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.