pH Calculator from [H+]
Compute pH from a hydrogen ion concentration with pH = -log10[H+], with pOH beside it.
pH from a hydrogen ion concentration
The page takes pH as minus the base-ten logarithm of the hydrogen ion concentration in mol/L, then prints pOH as 14 minus that pH. A concentration of 0.01 mol/L gives a pH of 2 and a pOH of 12.
The concentration must be above zero, because the logarithm of zero is not a number. The page assumes a dilute aqueous solution at 25 degrees Celsius, where the ion product of water is 1.0e-14; at another temperature the pOH figure is off, and in a non-aqueous solvent it means nothing. Very concentrated acids give a negative pH, which the page prints rather than clamps.
The logarithm is taken once, locally. Nothing is uploaded, nothing is stored, and the same concentration gives the same pH after a reload.
The page takes pH as −log10[H+] from a hydrogen ion concentration in mol/L, then prints pOH as 14 minus that pH. A concentration of 0.01 mol/L gives a pH of 2 and a pOH of 12.
The relation assumes a dilute aqueous solution at 25 °C, where the ion product of water is 1.0e-14: at another temperature the pOH figure is off, and in a non-aqueous solvent it means nothing. Very concentrated acids give a negative pH, which the page prints rather than clamping to zero.
How to use it
Enter the hydrogen ion concentration in mol/L and press Run. The concentration is a number, not a pH and not a pKa, and a value such as 1e-3 is accepted in scientific notation.
- Enter [H+] in mol/L.
- Read pH on the first line and pOH on the second.
- Treat the pOH as valid only near 25 °C in water.
The arithmetic, and where it stops
pH is minus the base-ten logarithm of the concentration, so each factor of ten moves it by one: 0.01 mol/L is 1e-2, giving pH 2. pOH is then 14 minus pH, which is the same statement as [H+]·[OH−] = 1e-14 rearranged into logarithms; the page prints both so the pair can be checked against the sum of 14.
The concentration must be above zero, because the logarithm of zero is not a number, and a zero or negative value is refused with the field named. A concentration far above 1 mol/L is not refused, but its pH is printed as the negative number the logarithm gives.
What to Expect
Best for
- Turning a measured hydrogen ion concentration into a pH for a dilute aqueous solution.
What this tool keeps
- The logarithm is taken once in this tab; no concentration is uploaded or stored. The same figures give the same result after a reload.
Sample input
0.01
Sample output
pH = 2 pOH = 12
Frequently asked questions
How do I use the pH Calculator from [H+]?
Enter the hydrogen ion concentration in mol/L and press Run. The concentration is a number, not a pH and not a pKa, and a value such as 1e-3 is accepted in scientific notation.
Does anything leave my browser?
No. The logarithm is taken once in this tab; no concentration is uploaded or stored. Reloading the page discards every value you entered.
Which inputs does it refuse?
The concentration must be above zero, because the logarithm of zero is not a number, and a zero or negative value is refused with the field named. A concentration far above 1 mol/L is not refused, but its pH is printed as the negative number the logarithm gives.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.