Mean Corpuscular Volume (MCV) Calculator
Compute MCV in femtolitres from haematocrit and red cell count.
MCV from haematocrit and red cell count
Enter haematocrit in percent and the red cell count in millions per µL. MCV is haematocrit × 10 ÷ red cells, in femtolitres; a haematocrit of 45 percent with 5.0 million cells per µL gives 90 fL.
A red cell count of zero is refused because it is the divisor, and a haematocrit above 100 percent is refused as more than whole blood. The page prints the volume and does not sort it into a category. This is arithmetic aid for a qualified reader, not a diagnosis or medical advice.
One multiplication and one division on the typed values. The same pair produces the same MCV after a reload, with no lookup table and no stored input.
The page computes mean corpuscular volume as MCV = haematocrit % × 10 ÷ red cell count in millions per µL, printed in femtolitres. The ten converts the percentage and the count scale into a volume per cell.
It prints the MCV and the substitution, so the × 10 and the divisor are both visible.
How to use it
Enter haematocrit in percent and the red cell count in millions per µL, then press Run. Both must be above zero and the haematocrit may not exceed 100, since more than whole blood is not a haematocrit. The output prints the MCV in fL and the substitution.
The arithmetic
A haematocrit of 45 % with 5.0 million red cells per µL gives 45 × 10 ÷ 5 = 90 fL. The × 10 is a unit step: it lets the percentage act as 450 so that dividing by millions of cells per µL lands the answer in femtolitres. It corrects nothing, and the result scales with the haematocrit and inversely with the count.
Where the page stops
The page does not classify the volume, does not compare it with an interval and does not combine it with any other index. A haematocrit above 100 or a count of zero is refused rather than divided, and neither input is clamped.
What to Expect
Best for
- Turning a haematocrit and a red cell count into a mean cell volume.
What this tool keeps
- The unit step and the division are both printed, so the fL figure can be rechecked.
What may need cleanup
- Nothing: one result and one substitution line.
Sample input
haematocrit 45 %, RBC 5.0 million/µL
Sample output
MCV = 90 fL Hct × 10 ÷ RBC = 45 × 10 ÷ 5 = 90 fL
Frequently asked questions
How do I use the MCV calculator?
Enter haematocrit in percent and the red cell count in millions per µL, then press Run. The page prints the MCV in femtolitres and the substitution with both numbers.
Is anything uploaded when I press Run?
No. The arithmetic runs in this tab with JavaScript: nothing is posted to a server, nothing is stored, and reloading the page discards both the input and the result.
Why is the haematocrit limited to 100?
Because the haematocrit is a percentage of blood volume, so a value above 100 describes more cells than blood. The page refuses it by name rather than computing from an impossible input.
Is this a diagnosis or medical advice?
No. It is an arithmetic aid for a qualified reader: the page prints the formula's output and the numbers behind it, and leaves interpretation, and any decision taken from it, to someone qualified to make it. It is not a diagnosis and not medical advice.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.