Firewood Cord Calculator screenshot

Firewood Cord Calculator

A stack in cords, face cords and cubic feet, with the cord defined as 3.624556 m³ of stacked wood.

Privacy First
0 Runs
Updated 2026-11-21
Runs in your browser
No sign-up, no upload

What the firewood cord calculator does

It turns a stack's dimensions into cords. Stack volume = length × height × log length, and a full cord is 128 ft³ = 3.624556 m³ of stacked wood, so a 2.4 m by 1.2 m stack of 0.4 m logs is 1.152 m³, which is 0.3178 cords. The face cords and the cubic feet are printed from the same volume.

A cord includes the air between the logs: it is a stacked measure, not a solid-wood measure, which the page states because a solid-wood figure needs a packing factor that depends on how the wood was split and stacked. A face cord is 8 ft by 4 ft by one log length, so its volume depends on the length you stacked.

Log lengths are accepted from 0.2 to 1.2 m, and a stack dimension of zero or below is refused by name. The page is a unit conversion: it does not know the species, the moisture content or the heat value of the wood.

Figures print to up to four decimal places with trailing zeros trimmed.

How to use it

Measure the Stack length and Stack height in metres along and up the stack face.

Set Log length to the length the logs were cut to.

Press Run. The result prints the stack volume, the cords, the face cords and the cubic feet.

Worked example

Input with the defaults:

Stack 2.4 × 1.2 m, logs 0.4 m

Output:

Stack:         2.4 × 1.2 × 0.4 m = 1.152 m³
Cords:         0.3178 (1 cord = 3.624556 m³ of stacked wood, air included)
Face cords:    0.9688 (8 ft × 4 ft × your log length)
Cubic feet:    40.6825 (1 m³ = 35.3146667 ft³)

Why it runs in your browser

The conversion runs in this tab. Your stack's dimensions are never uploaded.

The page turns a stack's dimensions into cords. A full cord is 128 cubic feet, or 3.624556 m³, of stacked wood, so a 2.4 m by 1.2 m stack of 0.4 m logs is 1.152 m³, which is 0.3178 cords.

Face cords and cubic feet are printed from the same volume, because a face cord is 8 ft by 4 ft by one log length and its volume therefore depends on the length you stacked.

A cord includes the air between the logs. The page says so plainly: it is a stacked measure, not a solid-wood measure, and turning one into the other needs a packing factor this page does not guess.

What a cord measures

A cord is a volume of stacked firewood, 8 ft by 4 ft by 4 ft, and it includes the gaps between the logs. That is why two stacks of the same cord count can hold different amounts of wood: split logs pack tighter than round ones, and a neatly stacked face holds more than a loose pile.

A face cord, sometimes called a rick or a stove cord, is 8 ft by 4 ft and one log deep. Its volume depends on the log length, so a face cord of 16-inch logs is a third of a cord and one of 12-inch logs is a quarter. The page computes it from the length you actually stacked.

Why the page stops at stacked volume

A solid-wood figure needs a packing factor, which depends on the species, the split, the diameter and how carefully the stack was built. Published factors vary by a fifth or more, so a page that applied one would be inventing a precision the measurement does not have.

The page is a unit conversion for a stack you can measure. It does not know the species, the moisture content, the seasoning or the heat value, and it does not claim any of them.

How to use Firewood Cord Calculator

Measure the Stack length and Stack height in metres along and up the face of the stack.

Set Log length to the length the logs were cut to, in metres.

Press Run. The result prints the stack volume, the cords, the face cords and the cubic feet.

What to Expect

Best for

  • Converting a measured stack into cords
  • Checking a seller's cord count on a delivered stack
  • Comparing face cords of different log lengths

Not ideal for

  • A solid-wood volume, which needs a packing factor
  • A heat or weight estimate, which needs the species and the moisture
  • A loose pile that has not been stacked

What this tool keeps

  • The stack and log dimensions you typed
  • All three units from one volume, so the conversion can be checked

What may need cleanup

  • A stack measured in feet, which has to be converted to metres
  • A log length in inches, which has to become metres

Common errors

  • Treating a face cord as a full cord
  • Measuring the stack's depth as the log length when the logs are stacked criss-cross

Example use cases

  • Checking a cord of delivered firewood
  • Working out how much space a winter's wood takes
  • Converting a face cord price to a cord price

Sample input

Stack 2.4 × 1.2 m, logs cut to 0.4 m.

Sample output

1.152 m³, 0.3178 cords, 0.9688 face cords, 40.6825 cubic feet.

Who this is for

  • Anyone buying or storing firewood by the cord
  • A seller checking a stack before delivery

Frequently asked questions

Is a cord the same as a face cord?

No. A full cord is 8 ft by 4 ft by 4 ft. A face cord is 8 ft by 4 ft and one log deep, so it is a third of a cord for 16-inch logs and a quarter for 12-inch ones. The page prints both.

Why is the solid-wood volume not shown?

It needs a packing factor, and published factors vary with the species, the split and the stacking. Applying one would invent a precision the measurement does not have, so the page stops at stacked volume.

Does a loosely stacked pile count as more wood?

No: a loose pile has the same wood in a larger volume, so it reads as more cords for the same logs. That is why cord counts are only comparable between stacks built the same way.

Can I use it for a stack of 1 m logs?

Yes, up to 1.2 m. The log length is the stack's depth in this model, which holds when the logs are stacked parallel. A criss-cross stack has a different depth and should be measured directly.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.