Paint Trim & Flashing Length Calculator screenshot

Paint Trim & Flashing Length Calculator

Linear metres of trim to paint or protect, allowing 5 m per door and 4 m per window, plus waste.

Privacy First
0 Runs
Updated 2026-11-06
No upload
Instant
No signup

The length is the room perimeter plus 5 metres per door and 4 metres per window, multiplied by one plus your waste percentage. The two allowances are stated on the page and the answer is in metric units.

A zero or negative perimeter is refused, and a negative door or window count is refused rather than treated as zero. The allowances and the waste percentage are printed so the total can be rebuilt by hand.

Every figure is an ordering estimate, not a structural specification, and none of it replaces an engineer's take-off. The arithmetic runs in your browser: nothing is uploaded and nothing is stored, so the same input prints the same answer on every reload.

The length is the room perimeter plus 5 metres per door and 4 metres per window, multiplied by one plus your waste percentage. An 18 m perimeter with two doors and three windows at 10 percent therefore reads 40 m before the allowance and 44 m after it, in metric units.

Metric linear metres of trim, with door and window allowances stated.

An ordering estimate, not a structural specification.

How to use it

Enter the room perimeter in metres, the door and window counts and a waste percentage, then press Run. The page prints the two allowances, the length before waste and the length to order.

Waste and units

5 metres per door and 4 metres per window are the page's own allowances for the architrave or flashing around each opening, printed so they can be checked against the opening sizes on site. The waste percentage scales the finished length, which is what a cutting list needs.

Where the page stops

A zero or negative perimeter is refused, and a negative door or window count is refused rather than treated as zero. The allowances are averages: a double door or a bay window takes more, and the page says so rather than pretending the count is a measurement.

What to Expect

Best for

  • Ordering trim or flashing by linear metre for a room.
  • Seeing the opening allowances separately from the perimeter.

What this tool keeps

  • Both allowances and the waste percentage print, so the total can be rebuilt by hand.

What may need cleanup

  • Nothing: the allowances and the total are the whole output.

Sample input

perimeter 18 m, 2 doors, 3 windows, 10 percent waste

Sample output

Doors: 2 × 5 = 10 m Windows: 3 × 4 = 12 m Length: 18 + 10 + 12 = 40 m With 10 percent waste: 44 m

Frequently asked questions

How much trim do I need?

Enter the perimeter in metres, the door and window counts and a waste percentage, then press Run. The page adds the opening allowances and applies the waste.

Is anything uploaded?

No. The sum runs in this tab: nothing is posted, nothing is kept, and no account is needed.

Where do the door and window allowances come from?

They are the page's own stated allowances — 5 m per door and 4 m per window — printed so they can be compared with the openings on site.

Is this a structural specification?

Every figure here is an ordering estimate, not a structural specification: it sizes a purchase, and an engineer's take-off or the manufacturer's data governs what is actually built.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.