Grass Seed Calculator
Seed mass and bag count from a lawn area and the seeding rate on your own bag — the page supplies no rate.
What the grass seed calculator does
It multiplies the area by the seeding rate you type, adds the waste allowance you set, and divides by the bag size when you give one. Seed = area × rate; a 200 m² lawn at 25 g/m² is 5000 g, a 5 % allowance makes it 5250 g, and 1000 g bags mean 6 bags once the count is rounded up.
The rate is a control, not a constant. A seeding rate depends on the species, the cultivar, the climate, the seed lot's germination and whether the lawn is new or being over-seeded, so this page supplies none: the 25 g/m² in the box is an example to be replaced, never a recommendation. The bag size is yours for the same reason.
The waste percentage covers the overlap at the edges and the seed a spreader throws past them, from 0 to 50 %. A rate above 1000 g/m² is refused as a typo, and so is an area above 1 000 000 m².
Figures print to up to four decimal places with trailing zeros trimmed.
How to use it
Enter the Lawn area in square metres, measuring the shapes you have and adding them.
Type the Seeding rate in grams per square metre from your seed bag, set Bag size if you want a bag count (0 skips it), and set Waste.
Press Run. The result prints the area, the rate it used, the seed mass, the mass after waste and the bags to buy.
Worked example
Input with the defaults:
Lawn 200 m², rate 25 g/m², 1000 g bags, 5 % waste
Output:
Seed: 5000 g (area × rate)
With waste: 5250 g (5.25 kg)
Bags: 6 (at 1000 g per bag, rounded up)
Why it runs in your browser
The multiplication runs in this tab. The rate and the area are never sent anywhere.
The page multiplies the lawn area by the seeding rate you type, adds the waste allowance, and divides by the bag size when you give one. A 200 m² lawn at 25 g/m² is 5000 g, a 5 % allowance makes it 5250 g, and 1000 g bags mean 6 bags once the count is rounded up.
The rate is a control, not a constant. A seeding rate depends on the species, the cultivar, the climate, the seed lot and whether the lawn is new or being over-seeded, so this page supplies none: the number in the box is an example to replace.
The page does not know your seed, your soil or your spreader, and it does not claim a germination rate.
Why the rate is yours to supply
Two bags of grass seed can carry rates that differ by a factor of three, because the rate is a property of the species and the seed lot, not of arithmetic. A page that printed a default would be publishing an agronomic recommendation it cannot support, so the field is empty of authority: the figure must come off your bag.
The same reasoning applies to the bag size. Seed is sold in 500 g, 1 kg, 5 kg and 25 kg bags depending on the market, and the page only needs the figure to turn a mass into a purchase.
What the waste allowance is for
A spreader throws some seed past the edge, and a lawn's corners and edges are easy to under-sow and then over-sow. The waste percentage covers that overlap and the small margin a job keeps, and it is applied to the seed mass before the bag count is rounded.
The area is the measured lawn, so a shape made of two rectangles is the two areas added. The page takes one figure and does not attempt a shape editor.
How to use Grass Seed Calculator
Enter the Lawn area in square metres, measuring each shape and adding them.
Type the Seeding rate in grams per square metre from your seed bag, set Bag size if you want a bag count, and set Waste.
Press Run. The result prints the area, the rate it used, the seed mass, the mass after waste and the bags to buy.
What to Expect
Best for
- Turning your bag's rate and a measured lawn into a seed order
- Converting a seed mass into a bag count
- Checking how much a waste allowance adds
Not ideal for
- Choosing a seeding rate, which is a species and climate question
- Germination, soil preparation or fertiliser
- Over-seeding a thin lawn, which usually uses a different rate
What this tool keeps
- The area, rate and bag size you typed
- The mass before and after waste, so the allowance is visible
What may need cleanup
- A lawn measured in square feet, which has to be converted to square metres
- A rate quoted in ounces per square yard, which has to become grams per square metre
Common errors
- Leaving the example rate in the box instead of your bag's
- Entering the bag's weight as the rate
Example use cases
- Ordering seed for a new lawn
- Splitting a large bag across several areas
- Checking a contractor's seed quantity
Sample input
Lawn 200 m², rate 25 g/m² from the bag, 1000 g bags, 5 % waste.
Sample output
5000 g of seed, 5250 g with waste, 6 bags to buy.
Who this is for
- Anyone sowing a lawn from a bag with a stated rate
- A landscaper checking a seed order
Frequently asked questions
Why doesn't the page suggest a seeding rate?
A rate belongs to the species, the cultivar, the climate and the seed lot, and two bags can differ by a factor of three. Supplying a default would be publishing a recommendation this page cannot support, so the rate is a field you fill from your bag.
Should I use the bag's rate or a heavier one?
Use the bag's rate unless your supplier or an agronomist says otherwise. Over-sowing wastes seed and can thin the lawn through competition; this page does the arithmetic on the rate you choose and does not advise one.
Why is the bag count rounded up?
You cannot buy part of a bag. The page prints the mass so you can see how much the rounding adds, and it skips the bag line entirely when the bag size is 0.
Does the waste percentage change the bags?
Yes. The allowance is applied to the seed mass first, and the bag count divides that larger mass, so a 5 % allowance can add a bag near a boundary.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.