CNC Speeds and Feeds Lab
Compute spindle RPM and feed rate for CNC milling jobs.
Compute spindle RPM and feed rate for CNC milling jobs. Enter your numbers and get an instant result.
Compute spindle RPM and table feed for a milling cut from a material's surface speed, the tool diameter and the number of flutes.
The material presets supply cutting speed and chip load; the arithmetic is the standard speeds-and-feeds identity, not a toolmaker's recommendation for your machine.
How to use CNC Speeds and Feeds Lab
Pick the stock in material, type the cutter diameter in tool_diameter and the tooth count in flutes, then set unit to Imperial or Metric.
Read spindle RPM first and table feed beside it: RPM is surface speed over diameter, feed is RPM times flutes times chip load.
Treat both numbers as starting values to dial in: rigidity, coolant, coating and depth of cut are not inputs, and a calculated RPM can still chatter.
Surface speed becomes RPM
RPM is surface speed × 1000 ÷ (π × diameter) in metric, or surface speed × 12 ÷ (π × diameter) in imperial. Feed per minute is RPM × flutes × chip load, so the tooth load is what sets the table rate.
Both unit systems are converted to a common basis before the division, which is why the answer does not change when you switch units. The reference panel prints the cutting speed and chip load the preset supplied, so the two numbers behind the result are visible rather than buried.
What to Expect
Best for
- Getting a starting spindle speed for a new cutter.
- Converting a surface speed into RPM for a given diameter.
What this tool keeps
- The parameters go to the tool server to run the speeds-and-feeds arithmetic; no account is needed and no job is stored.
Sample input
Aluminium, 6 mm cutter, 2 flutes, metric
Sample output
Spindle RPM: 10610 Table feed: 1273 mm/min (200 m/min surface speed, 0.06 mm/tooth chip load)
Frequently asked questions
Where do the cutting speeds come from?
A preset table for aluminium, mild steel, stainless steel, wood and plastics, each with a surface speed and a chip load. They are starting values, not a recommendation for your machine, coating or depth of cut.
Which unit systems are supported?
Imperial (inches, surface feet per minute) and metric (millimetres, surface metres per minute). The inputs are normalised before the formula, so the RPM agrees between them.
Does it account for rigidity or tool life?
No. Machine rigidity, coolant, depth of cut and tool coating are not inputs. A calculated RPM can still chatter, which is why the result is a starting point to dial in.
Build custom tools for your store
Join the SDK program to create useful ecommerce utilities for your store.