Paint Area & Coverage Calculator screenshot

Paint Area & Coverage Calculator

Paintable wall area and litres of paint for a room, with openings deducted and waste added.

Privacy First
0 Runs
Updated 2026-11-06
No upload
Instant
No signup

The perimeter is twice length plus width, and the wall area is that perimeter times height minus the openings you enter. Coverage is taken at 10 square metres per litre per coat, in metric units, with your waste percentage added.

A zero dimension is refused by name, and an openings area that removes the whole wall is refused with both figures quoted rather than printing a negative area. The coat count and waste percentage appear on the answer line.

Every figure is an ordering estimate, not a structural specification, and none of it replaces an engineer's take-off. The arithmetic runs in your browser: nothing is uploaded and nothing is stored, so the same input prints the same answer on every reload.

The perimeter is twice length plus width, and the wall area is that perimeter times height minus the openings you enter; coverage is taken at 10 square metres per litre per coat, with your waste percentage added. A 5 × 4 m room at 2.4 m with 4.2 m² of openings and two coats at 10 percent therefore reads 39 m² and 8.58 L, in metric units.

Metric paintable area and litres, with openings deducted and coats counted.

An ordering estimate, not a structural specification.

How to use it

Enter room length, width and height in metres, the openings area in square metres, the number of coats and a waste percentage, then press Run. The page prints the perimeter, the net wall area, the litres per coat and the total.

Waste and units

10 m² per litre per coat is the coverage the page assumes, printed so a different product figure can be substituted by hand. The openings are subtracted before the division, so a room with large windows is not over-ordered, and the waste percentage applies to the paint rather than to the area.

Where the page stops

A zero dimension is refused by name, and an openings area that removes the whole wall is refused with both figures quoted rather than printing a negative area. The page assumes one flat coverage: porous or strongly coloured surfaces take more coats, and the ceiling and trim are not included.

What to Expect

Best for

  • Estimating litres for a room from its dimensions.
  • Seeing the net wall area after openings are deducted.

What this tool keeps

  • The net area, the coverage and the coat count all print, so the litres can be reworked for another product.

What may need cleanup

  • Nothing: the area and the litres are the whole output.

Sample input

5 × 4 m room, 2.4 m high, 4.2 m² openings, 2 coats, 10 percent waste

Sample output

Perimeter: 2 × (5 + 4) = 18 m Wall area: 18 × 2.4 − 4.2 = 39 m² Paint: 39 ÷ 10 = 3.9 L per coat 2 coats with 10 percent: 8.58 L

Frequently asked questions

How much paint for a room?

Enter the room dimensions, the openings area, the number of coats and a waste percentage, then press Run. The page prints the net wall area and the litres.

Is anything uploaded?

No. The arithmetic happens in this tab, so nothing leaves the page, nothing is stored and no account is involved.

Why is an openings area that removes the wall refused?

The net area would be zero or negative, so the page names the refusal and quotes both figures instead of printing a negative litre count.

Is this a structural specification?

Every figure here is an ordering estimate, not a structural specification: it sizes a purchase, and an engineer's take-off or the manufacturer's data governs what is actually built.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.