Roofing Calculator screenshot

Roofing Calculator

Slope-corrected roof area and roofing squares from the plan area and the pitch, with a waste allowance.

Privacy First
0 Runs
Updated 2026-11-21
Runs in your browser
No sign-up, no upload

What the roofing calculator does

It corrects the plan area for the slope and then counts the order in squares. The pitch is the rise per 12 of run, the slope factor is √(1 + (pitch / 12)²), and the roof area is the plan area times that factor. A 100 m² plan at 6:12 has a factor of 1.118, so the roof is 111.8034 m²; with 10 % waste the order is 122.9837 m².

A roofing square is 100 square feet, or 9.290304 m², so the same order is 13.2379 squares. That is the unit a shingle order is counted in; the page does not choose a shingle, so it does not turn squares into bundles.

Overhangs, dormers and valleys are not included, and the page says so: they are area the plan does not carry. A plan area of zero or below is refused, a pitch outside 0 to 24 rise per 12 is refused, and the waste percentage is capped at 50.

Figures print to up to four decimal places with trailing zeros trimmed.

How to use it

Set Plan area to the footprint the roof covers in square metres, measured on the horizontal.

Set Pitch as the rise per 12 run and Waste to your allowance, then press Run. The result prints the slope factor, the roof area, the order with waste and the squares.

Worked example

Input with the defaults:

Plan area 100 m², pitch 6, 10 % waste

Output:

Slope factor:  1.118 (√(1 + (6 ÷ 12)²))
Roof area:     111.8034 m² (100 × 1.118)
Squares:       13.2379 (100 sq ft = 9.290304 m² per square)

Why it runs in your browser

One square root and one multiplication run in this tab. Your roof's dimensions are never uploaded.

The page corrects a roof's plan area for its slope and counts the result in roofing squares. The slope factor is √(1 + (pitch/12)²), so a 6:12 pitch multiplies the plan area by 1.118.

A 100 m² plan at 6:12 is 111.8034 m² of roof; with 10 % waste the order is 122.9837 m², which is 13.2379 squares. A square is 100 square feet, or 9.290304 m², and it is the unit a shingle order is counted in.

The plan area is measured on the horizontal, which is what a footprint drawing gives you. Overhangs, dormers and valleys are not in it, and the page names them rather than implying a complete take-off.

Why the slope lengthens the roof

A sloped surface covers more area than the footprint beneath it, because the same horizontal run is travelled along a longer incline. The pitch is the rise per 12 of run, so 6:12 means half a unit up for every unit across, and the slope factor is the hypotenuse of that little triangle.

A flat roof has a factor of 1 and its plan area is its area. A steep 12:12 roof has a factor of √2, so it is about 41 % larger than its footprint — which is why the correction cannot be skipped.

Squares, bundles and what the page does not choose

A roofing square is 100 square feet, or 9.290304 m². It exists because shingles are packaged to cover a fraction of a square, and an order is counted in squares rather than in square metres.

How many bundles cover a square depends on the product, so the page stops at squares. It does not choose a shingle, and it does not add the starter course, the ridge cap or the underlayment — each of which is a product decision.

How to use Roofing Calculator

Set Plan area to the footprint the roof covers, measured on the horizontal in square metres.

Set Pitch as the rise per 12 of run — 6 for a 6:12 roof — and set Waste to your allowance.

Press Run. The result prints the slope factor, the roof area, the order with waste and the number of squares.

What to Expect

Best for

  • Turning a footprint and a pitch into a roof area
  • Counting an order in roofing squares
  • Comparing the same plan at two pitches

Not ideal for

  • A roof with dormers, valleys or multiple pitches, whose areas have to be summed separately
  • A bundle count, which depends on the shingle product

What this tool keeps

  • The plan area, pitch and waste you typed
  • The slope factor and the roof area, so the correction is visible

What may need cleanup

  • A plan area that excludes the overhang, which has to be added
  • A pitch written in degrees, which has to be converted to rise per 12

Common errors

  • Ordering from the plan area without the slope correction
  • Forgetting that dormers and valleys add area the footprint does not show

Example use cases

  • Ordering shingles for a simple gable roof
  • Checking a roofer's square count
  • Comparing material cost at two pitches

Sample input

Plan area 100 m² at a 6:12 pitch with 10 % waste.

Sample output

Slope factor 1.118, roof area 111.8034 m², 13.2379 squares.

Who this is for

  • Homeowners ordering roofing material
  • Roofers checking a take-off

Frequently asked questions

Why is the roof bigger than the footprint?

A sloped surface is longer than the horizontal distance it covers. The slope factor √(1 + (pitch/12)²) is that extra length, applied to the whole area.

How big is a roofing square?

100 square feet, which is 9.290304 m². It is a unit of account for shingle packaging, not a physical sheet.

How many bundles do I need?

The page does not say, because bundles per square depends on the shingle. Check the product's coverage and multiply the squares it gives.

What pitch should I enter?

Rise per 12 of run, which is how a roofer states it: a 6:12 roof rises 6 units for every 12 across. A pitch given in degrees has to be converted first.

Developer program

Build custom tools for your store

Join the SDK program to create useful ecommerce utilities for your store.